Skip to content

How to clear an Anki backlog without deleting your deck

4,000 overdue Anki cards take 20 days at 200 extra reviews a day. Stop new cards, triage each one, then run a two-deck catch-up inside Anki.

Kirill Oleinichenko

Reviewed by Kirill Oleinichenko ·

Share

Published 9 min read

On this page

To clear an Anki backlog, stop adding new cards and decide what each card is worth: keep it, suspend it, reset it, or delete it. Then sort your reviews so the cards you are most likely to have forgotten come first, separate the overdue pile from today's reviews, and work through that pile at a fixed number of cards a day. Everything below happens inside Anki, uses the menu names from the current manual, and comes with the arithmetic for how long it will take. Sometimes deleting the whole deck is the right call, and this page says when.

Why the queue compounds

Anki's manual does the arithmetic for you: 20 new cards a day leads to roughly 200 reviews a day. New material comes back several times before its interval grows, and every one of those repetitions lands on a future day. A missed day does not delete its reviews; they wait and stack on top of the next day's. The manual's advice for this situation is direct: stop introducing new cards until you catch up, because adding more while you are behind makes the backlog worse.

Anki users describe the same mechanism. An r/Anki guide on clearing a backlog defines SRS debt as unfinished reviews carried into the next day, and adds: "You'll have twice as many reviews tomorrow if you miss reviews now." The same post says debt is the most common reason people quit.

Here is the arithmetic on a 4,000-card backlog. At 100 extra reviews a day, the pile lasts 40 days. At 200 extra reviews a day, it lasts 20 days. Treat it as arithmetic on the number you pick: your normal reviews continue on top, and a day you skip pushes the end date back. The minutes per day depend on how fast you answer.

The feelings around the number are part of the problem. A thread on r/Anki is titled "I have a 4000+ card backlog, and I need help". In another thread, the creep shows up in minutes: "…began to take 45 minutes, and then this morning took me a full hour." And the warning that matters most comes from a commenter on the 4,000-card thread: "The main risk when clearing a backlog is psychological. People see a huge number and feel compelled to sprint until they burn out and either reset their deck (terrible) or quit anki altogether." This page resets cards you pick from the table below, one at a time; a whole-deck reset is the case the comment describes.

What to do with each card

Suspend, Reset and Delete take cards out of the review queue in different ways. The definitions come from the manual.

  • Suspend hides a card, or every card of a note, until you unsuspend it. Use it for cards you want to keep but not practice now.
  • Reset moves cards to the end of the new queue. The review history stays, and you can optionally restore the original position and reset the lapse and repetition counters. A reset card becomes new again, so it waits while New Cards/Day is 0.
  • Delete removes the selected notes and all their cards.
CaseActionWhat happens in AnkiWhat you give up
You still need it and you can still recall it, even if it is long overdueKeep it in the catch-upWhen you answer it correctly, it goes back to its home deck with a new due date; if you forget it, the home deck's relearning steps show it again and it returns when relearning is completeThe minutes it takes
You still need it, but you have mostly forgotten itResetIt moves to the end of the new queue; the history stays and the counters can resetIt returns as new and takes a new-card slot once New Cards/Day is above 0; the interval you built is gone
You might need it later, but not nowSuspendIt leaves the queue until you unsuspend itYou stop practicing it; the interval stays as it was until you unsuspend it
You no longer need itDeleteThe note and all its cards disappearThey are gone; export the deck first if you might want the text

Walk the table in this order: value first, then whether you can still recall the card. A card you would not make again is a delete even if you learned it yesterday. A card you still need and can still recall is a keep, however long it has been overdue. A card you still need and have mostly forgotten is a reset. Do this pass before you build the backlog deck: it gathers only cards that are still due, which means the ones you kept. Reset cards are new again, and is:due never gathers new cards, so they wait in the new queue until New Cards/Day is above 0.

Set New Cards/Day to 0 (step 1 below) before you reset a batch, so the reset cards wait. That queue moves when you turn new cards back on, so set the number you can sustain, count the reset cards inside it, and keep the Over Due deck at its own fixed number.

The catch-up procedure in Anki

The order matters: stop the inflow, set the review order, split the pile into two filtered decks, then set retention for the workload ahead. The triage above comes first, so the decks gather only the cards you kept. Menu names follow the current Anki manual, checked on 12 November 2026; older versions may differ.

  1. Set New Cards/Day to 0. Open Deck Options, find Daily Limits, and set New Cards/Day to 0 for this deck and each subdeck, using the This deck scope. A change to the Preset applies to every deck that shares it. New cards are what created the pile. A card you reset waits in the same queue, so this number also controls when those cards come back.

  2. Change Review Sort Order for the home deck. In Deck Options, open Display Order and find Review Sort Order. With the older SM-2 scheduler, choose Relative overdueness: it shows the cards you are more likely to have forgotten first. With FSRS, that option is gone from Deck Options and the equivalent is Ascending retrievability, calculated from each card's probability of recall and your desired retention. This order applies when you study the home deck; the filtered decks in the next step have their own order setting.

  3. Build two filtered decks. Create a filtered deck with the search deck:"Your deck" is:due prop:due>-7 and call it Just Due. Create a second one with deck:"Your deck" is:due prop:due<=-7 and call it Over Due. This is one Anki user's method, quoted in the manual's Catching Up section; the deck: part is our addition, so both decks gather from one deck. Just Due holds the cards that became due in the past week. Over Due holds the backlog, and you work through it at a fixed number of cards a day.

    In each deck's filter dialog, set the order to Relative overdueness; under FSRS Anki calculates it from each card's retrievability and your desired retention, so both decks show the cards you are most likely to have forgotten first. Give Just Due a limit higher than the number of cards due in a week, so it gathers all of them. Give Over Due a limit equal to your daily number, 100 for example: the limit is how many cards Anki gathers.

    During the catch-up you study both decks every day, Just Due first and Over Due after it. Cards leave a filtered deck as you study: a card you answer correctly returns to its home deck with a new due date, and a card you forget stays until the home deck's relearning steps are complete. Press Rebuild on Just Due every day before you study, and on Over Due when it empties.

  4. Set Desired Retention for the workload ahead if you use FSRS. Desired retention is the share of cards you want to recall when they come due. Lower retention means significantly fewer reviews and more forgotten cards. Anki's default is 90%, and the manual recommends staying below 97% because the workload rises quickly near the top. Help Me Decide simulates the workload at different levels, so you can choose a level you can sustain. This step changes future scheduling; it leaves the cards already overdue where they are, as long as Reschedule cards on change stays off.

Maximum Reviews/Day caps the home deck's daily reviews. When you reach the limit, Anki hides the remaining review cards for the day and says so on the congratulations screen. It does not brake the filtered decks, which step outside the normal limits; for the backlog, Over Due's own limit is the brake.

When deleting the deck is correct

Sometimes the deck itself is what you delete. The exam passed, the language dropped, the cards are ones you would not make again. Keeping it in the rotation costs reviews and gives nothing back. Export it first if the text might be useful, then remove it.

If you would rather not carry a backlog at all

Kardo is our app. It shows no count of overdue cards. A day counts for the streak once you review 10 different cards, or, on a day with few due cards, once you rate every one of them, and the cards you did not reach stay due for your next session. Importing an Anki deck into Kardo starts every card as new and leaves the review history behind, so it is closer to starting a fresh deck than to Anki's Reset; it only suits someone who would start over anyway. The import guide shows what comes across and what stays behind; the comparison with other Anki alternatives covers the rest. For the mechanism behind forgetting, why you forget words you know explains the retrieval gap, and relearning a language after a break covers the return.

Common questions

Should I reset my whole deck?

Reset suits cards you still need and have mostly forgotten. A whole-deck reset wipes the scheduling on cards you still know, so use it when most of the deck is in the forgotten group. If you only want a clean start, export the deck first: the export keeps your notes, while the scheduling you reset is gone.

Should I turn on Reschedule cards on change?

By default, a new desired retention applies to future scheduling only, and the cards already overdue stay where they are. Reschedule cards on change moves their due dates instead, and depending on the retention you pick, it often makes a large number of cards due at once. The manual advises against it when you are first switching from SM-2.

How long will it take to clear 4,000 cards?

At 100 extra reviews a day, 40 days; at 200, 20 days. That is arithmetic on the number you choose, and it assumes you keep up with the cards that become due in the meantime. Your answering speed decides the minutes per day, and the number of extra reviews decides the days.

Is it better to suspend or delete?

Suspend a card that might matter later: it waits without costing reviews. Delete a card you would not make again: it removes the note and all its cards.

Sources

Kirill Oleinichenko

How Kardo writes

Study new words without a backlog counter

Kardo makes cards from your lessons, texts and videos, and shows no overdue count. A day counts once you review 10 different cards, or rate every due card on a light day.

Start free